April 07, 2018

High-tensile non-electric wire fence | Gallagher Fence Superstore

Buy Here! 

The high tensile non-electric fence uses 8 strands of 12.5-gauge high-tensile wire on 4-inch diameter pressure-treated wood posts. Posts are 20 feet apart. Bracing utilizes three 8 inch diameter posts and two 4 inch diameter cross braces on each end. Wire tension on this fence is maintained with springs and ratchet-type tensioning devices.

An alternative would be to set posts 30 feet apart and place two stay rods in the wire between each set of posts. Cost would be reduced about $70 for every 1,320 feet of fence, or $0.07 per foot.

Leave a comment

Comments have to be approved before showing up.